1 in stock
The higher level Ultra-lite open front archer
It’s the Higher Level, and performs levels above any other cable-style climbing Tree Stand. But this one is SPECIAL! This Lightweight Climbing Tree Stand is our lightest Higher Level to date weighing in at a mere 19 lbs. Perfect telescoping rails slide back out of the way, perfect for Traditional Archers with stickbows and recurves. The Ultra-LITE Open Front is just like the Higher Level Archer 21.5″ except with an open seat platform. Sit back-to-the-tree and have an open shooting platform facing away from the tree. Side bars extend out for sitting and facing the tree (climbing position). Side bars are held in place by knob screws and brass threaded inserts and telescope into the frame.
Other Lightweight Climbing Tree Stands require the hunter to judge how high he plans to hunt and then determine just how much smaller that tree is at that height so he can mount his climbing tree stand on the base of the tree with sufficient angle to end up level when he reaches hunting altitude. Impossible? No, of course not, we’ve all done it but when hunters need to be mobile, going to new trees can present some difficult judgment calls. How high do you want to climb? Will there be a branch in my shooting lane? Will I need 5 more feet when I get up there? With the Open Front Higher Level Lightweight Climbing Tree Stand it’s no problem at all. You don’t have to begin your ascent at a steep incline anymore! Just level yourself as you climb.
self-leveling, lightweight climbing tree stand
We’ve all been there before… you’ve just climbed twenty feet and your foot platform is already sloping downward at five degrees. “No worries” we say! It’s only an evening hunt and you can be ‘out-of-level’ for a few hours. Then it begins to rain. Each time you stand up the foot platform gets a little more slippery. Now you’re wishing you hadn’t gone that four more feet after passing level.
Never hunt from a climbing tree stand that is not level! All climbing tree stands rely on the physical properties of the device design to stay put on the tree, and that means being LEVEL. All climbing tree stands are designed to be used at LEVEL, thus creating the safest elevated platform from which to hunt.
Higher Level Climbing Tree Stands make it possible for the hunter to be level at all times. While climbing, while hunting, and while descending the tree! Simply shift all your weight off the platform you wish to level before cranking the gear-box crank handle. If you need to hunt higher, just crank slightly above level, and continue your ascent. The self-leveling adjustment allows mobility like no other mobile tree stand. You can hunt higher than other stands because you have much more ability to accommodate the reduction in diameter of the tree as you go up.
Safe, reliable, and stable platforms
Our Open Front, Lightweight Climbing Tree Stand comes with the ultimate in Stand Safety and Stability. The Stand Stabilizing Straps keep you in contact with the lower platform while climbing so if you lose control and drop that platform with your feet; the stand stabilizer straps retain the platform like a lanyard for you to regain control! When you reach hunting altitude, simply bind the two straps down tight and they feel as if they were bolted into the tree.
*Picture may include optional accessories
Climber Width 21.5″ Length 29″
Weighs 19 Lbs
Tree sizes 8″ – 20″ Diameter
5 yr. Guarantee on the Frame and all welds
Specialty Geared-Leveling Channel Arms
Powder Coated, Durable finish (Deep Forest Green)
Telescoping Locking Side Rails
Padded Backpack Straps
Stand Stabilizer Straps
Elastic Foot Strap Climbing Aides
Ultra-Comfy, Padded Cushion, Reversible Bench Seat
Rated to 300 Lbs.
What’s NOT in the box!
1. Your Industry Standard Fall Restraint Harness meeting TMA Standards http://www.tmastands.com/wp-content/uploads/2014/10/English-TSG.pdf
2. Your permission to hunt other people’s land.
3. Your 8 Pt. Buck!